Aqua Africa

Products > Turbelle Pumps > Turbelle Controller

Turbelle Controller

General information

All Turbelle® pumps with driver can be controlled electronically. For this purpose extensive control accessories have been developed in order to be able to simulate various marine flow conditions in the aquarium.

	Simple washing of waves / 7091 + 7095 By setting the pump capacity and by adjusting the pulse time, big and small waves can be produced like in natural wave conditions.
	Sequential pump circuit / 7095 The four pumps are started up one after each other, which produces a swelling current. The time to the next pulse can be set.
	Chance flow / 7095 Chance flow is generated by wave simulation and sequential pump circuit. In some reef zones (surf), this combination is important.
	Simulation of tidal currents / 7095 The pump channels 1 and 2 are switched on or off alternately. The water flows through the reef from both sides at an adjustable switching time of up to 12 hours.
	Operation in night mode / 7091 + 7095 The photo-electric cells can be used to lower the pumping power during the night. Like in a reef, small animals and plankton can rise in the aquarium to take the habitat of diurnal animals.
	Foodtimer / 7091 + 7095 By the push of a button, the pump can be stopped during feeding. After eight to ten minutes, the system is started again automatically.
	Moonlight / 7095 Moon simulation in reef aquariums with white LED light, adjustable to a moon phase of 29 days.

Singlecontroller
(7091.000)
For the wave simulation of a Turbelle® electronic or stream 6000/6100/6200 including connecting cable. Y adapter 7092.34 can be used to synchronously operate two Turbelle® electronic. If the photo-electric cell 7094.05 (not included in the scope of delivery) is attached to the connecting port, the night-mode operation is activated automatically.
Foodtimer: By the push of a button, the pumps can be stopped to enable feeding. After about eight to ten minutes, a restart is carried out automatically.

7091.000

R 650.93

Multicontroller
(7095.000)
TUNZE® Multicontroller 7095 is a digital control unit for all Turbelle® pumps fitted with driver 7240.26 and 7240.27 operating on safety extra-low voltage. It simulates the various marine current conditions in the aquarium, and thus is suitable for use with Turbelle® 7200/2, 7300/2, 7400/2, 6000, 6100, 6200. By means of the pump adapter 7094.40, Turbelle® classic 2002, 4002 can also be controlled. Multicontroller 7095 can control up to eight Turbelle®, and contains an LED moonlight with a 29-day moon phase. A wavebox 6212 and the pumps mentioned above can also be controlled by the Multicontroller. The clearly arranged operating panel with a waterproof membrane keypad and adjusting knobs ensures a precise and practice-oriented operation. The output of the controlled pumps is shown by an LED display indicating from 30 to 100 per cent.
Delivery with four connecting cables 7092.30 and a photo-electric cell, permitting a near-natural current control with up to four Turbelle® electronic. Y adapter 7092.34 can be used to connect up to eight Turbelle® electronic which are controlled in pairs.

7095.000

R 2,663.87

Accessories (order separately)

Y-Adapter
(7092.340)

Extends two output connections to 2 x 2 input connections; including four connection cables 7092.30.

7092.340

R 466.30

Photo-electric cell
(7094.050)

Permits operation in night mode with Singlecontroller 7091. Standard feature in Multicontroller 7095.

7094.050

R 165.86

Designed and Maintained by Electronic Marketing