Aqua Africa

TUNZE RO Station

Nano RO station
(8515.000)

30 to 60 litres/day (7.9 to 15.8 USgal.) at 3 to 6 bar (43 to 87 PSI) and 15 deg. to 25 deg. Celsius (59 deg. to 77 deg. F).
TUNZE® Nano RO Station 8515 is a compact high-quality reverse osmosis plant employed for the easy production of pure water (RO water) to be used for irons, preparation of ice cubes, bubble humidifiers, car batteries, et cetera. In aquarism, it is especially suitable for small and medium-sized marine and fresh-water aquariums. It is very easy to operate and can be connected directly to a water tap using the accessories supplied by the manufacturer.

8515.000

R 1,016.44

Accessories (order separately)

Carbon Block Filter
(8515.120)

8515.120

R 112.79

RO station
(8550.000)

100 to 200 litres/day (26 to 52.8 USgal.) at 3 to 6 bar (43 to 87 PSI) and 15 deg. to 25 deg. Celsius (59 deg. to 77 deg. F).
TUNZE® RO Station 8550 is a high-quality reverse osmosis plant used to produce pure water. In aquarism it is especially suitable for marine and fresh-water aquariums. RO Station 8550 consists of a 20 µm sediment filter, a 5 µm carbon sediment filter, a .5 µm carbon filter and a thin-film composite membrane (polysulfone compound).

Accessories (order separately)

Carbon sediment filter 5µm
(8522.120)

8522.120

R 177.37

Carbon sediment filter .5 µm
(8550.100)

Sediment filter 20 µm
(8550.120)

Sediment filter 20 µm
(8550.120)

Accessories (order separately)

Mixed bed ion exchanger
(8550.501)

RO TDS Monitor
(8533.000)

RO TDS Monitor 8533 is used for the precise determination of the water quality of reverse osmosis plants. It continuously measures the conductivity in ppm at the water inlet / water outlet of the reverse osmosis plants and renders information on the necessity of a filter or membrane change.

8533.000

R 883.16

RO water controller
(8555.000)

TTUNZE® RO Water Controller 8555 is an automatic water level controller used in the pure-water container of TUNZE® RO station. The controller is also suitable for other water tanks or can be connected to an automatic refill system. It consists of a controller, two sensors, a water valve and an 11 V power supply unit. Depending on the demand, the water valve can be replaced by switched socket outlet 3150.11 for mains operation.
If the position of the sensors of the RO water controller is reversed, the switched socket outlet 3150.11 and a pump can be used to empty a water tank, and thus it can also be used for automatic filling or emptying of tanks. By means of a combination of two units, a water changing system can be built.

8555.000

R 1,995.43

Accessories (order separately)

Switched socket outlet 3150.11
(3150.110)

In the Osmolator and Osmomat, the enclosed low-voltage centrifugal pump can be replaced by this switched socket outlet in combination with a more powerful pump. The switched socket outlet can be used to switch metering pumps with 230 V (115 V), max. 1,800 W (900 W), such as Turbelle® 800/2, 1200/2, Master 1073.03 or a hose metering pump.

3150.110

R 640.36