TUNZE Outlets
TUNZE® outlets with surface suction are an ideal solution
for pressureless water supply below the aquariums. An equal ratio of surface
water and water from the lower water column are removed. The outlets remove
only as much water as is pumped into the aquarium. On account of the light-protected
construction, they are almost maintenance-free.
TUNZE® outlets are supplied ready for mounting, with detailed mounting
instructions. Inlet and outlet pipes are not included.
Two outlet systems should be used in aquariums with more than 600 litres
(158.5 US gal.).
At the outlet side, commercially available outlet pipes can be connected
to the pipe sockets. However, we recommend the use of the outlet hose
system 1075/2 to keep the noise as low as possible.
For the inlet, we recommend our inlet hose set 1073. The connecting hose
for the pump in the cabinet is included.
 |
Outlet for retrofit (1074/2) The outlet 1074/2 does not require a borehole in the glass, and thus can be retrofitted. Even after an interruption of the recirculation pump, it will continue to operate. In combination with the outlet hose and fittings 1075/2, the outlet can be used up to abt. 1,200 l/h (317 USgal./h). With additional overflow 1001.74, it can be used up to 1,500 l/h (396 USgal./h). |
 |
Wall outlet for glass boreholes (1076/2) The Wall outlet 1076/2 is used for installation in aquariums with boreholes (43 to 45 mm / 1.6 to 1.7 in.) in the rear or lateral walls. In combination with outlet hose and fittings 1075/2 the outlet can be used up to abt. 1.500 l/h (396 USgal./h). |
 |
Central outlet (1077.000) The central outlet 1077 is used for plants which have been provided with an internal central outlet pipe. An outlet of abt. 1,500 l/h (396 USgal./h) has to be assumed. |
 |
Screw connection, pipe and hose (1077.100) For outlet 1077, consisting of screw connection 40/50 mm (1.57/1.96 in.), 1 3/4” for glass borehole in the bottom, abt. 55 mm (2.1 in.) in diameter, and upright stand pipe 1 m (39.3 in.) by 40 mm (1.57 in.) in diameter. A stainless steel clip with outlet hose 1 m (39.3 in.) by 40 mm (1.57 in.) in diameter is supplied. Delivery without mounting instructions; to be mounted by experienced expert only. |
 |
Outlet hose (1075/2) Consisting of 2m (78.7in.) special outlet hose, diam. 40mm (1.57in.), with clamps and holder. |
 |
Inlet hose and fittings (1073.000) C onsisting of four pipes, diam. 25 mm (.98 in.) x 1 m (39.3 in.) and three sleeves, diam. 25 mm (.98 in.), seven 90° angles, connecting hose and clamps.
|
 |
Master Recirculation Pump (1073.030) With compact dimensions and variable output. The pump outlet,
diam. 25 mm, can be positioned upwards or to the front; eight
suction cups ensure a stable attachment and prevent vibrations
in the filter box. Long-life drive with high-performance impeller
and automatic cleaning. |